Huawei B970 Quick Start Manual page 36

window so it can receive stronger signals.
Caution: To avoid electrical devices from interfering by the wireless signal,
place electrical devices one meter away from the gateway.
•
Step 6: Power on the Gateway
Press and hold the
•
Step 7: Make a Call
You can make and receive phone calls if you have telephone set connected to
the gateway. When you hear the dial tone after picking up the handset, you can
make a call.
•
Step 8: Internet/Dial-up Access
By default, the gateway dials up to access the Internet as required. You can
directly use the network services such as web browsing, and receiving or send-
ing emails.
•
Step 9: Gateway management page
If you need to configure the WLAN or other gateway-related parameters (PIN
code verification, IP settings, WLAN security, etc.), you need to access the gate-
way management page using Internet Browser (address
There are two modes of gateway management page:
Admin: Have the rights to view and modify the configuration, and the default
password is admin;
User: have the right to view only the basic information and the default password
is user.
Some configuration examples and advice you will find in the FAQ (Frequently
Asked Questions) chapter of this quick start guide. For detailed operations re-
fer to the wireless gateway user guide which can be found when you connect
your gateway in the USB modem mode to the PC with Windows OS. Also, user
guide is available for download on website
Note: To avoid the conflicting configurations, only one user is allowed to log in
to the gateway management page at a time.
ON/OFF to power on or off the gateway.
www.bite.lt or www.bite.lv.
36
http://192.168.1.1 ).