Pioneer BDP-05FD Service Manual page 33
Hide thumbs
Also See for BDP-05FD:
- Service manual (127 pages) ,
- Operating instructions manual (72 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
5
QQ
3 7 63 1515 0
Service Indication Screens
1. Overview
On Service Indication screens, data that are retained by the System Controller are displayed with the aid of the remote
control unit for service (GGF1067). (Not for use by general users)
The maximum display area for on-screen displays is 64 one-byte characters (widthwise) × 17 lines (lengthwise).
2. How to Operate
To display indications for servicing, use the remote control unit for service.
• How to enter Service Indication mode
The following key input can be accepted either in Normal Startup mode or Service mode.
(1) Without any GUI displayed, press the ESC key.
ESC
(2) Then press the DISP key. The 1st screen (version data, etc.) is displayed.
1st screen (version data, etc.)
(3) To shift to a subsequent screen, press the corresponding key:
[2]: 2nd screen: Error rate measurement 2 (for continuous playback)
[3]: 3rd screen: ATA/ATAPI debugging (drive data)
TE
L 13942296513
• How to exit Service Indication mode
Press the ESC key.
• How to shift between screens
To shift to the next screen, press the DISP key. To shift to the previous screen, press the CX key.
• How to shift between subscreens
To shift to the next subscreen, press the DIG/ANA key. To shift to the previous subscreen, press the TEST key.
3. Overview of Screen Shifting
An overview of screen shifting in Service Indication mode is given below.
Press [DIG/ANA] key.
Packages
Data screen
Press [TEST] key.
www
* To exit any screen, press the ESC key.
* For details on the Error Rate Measurement 2 screen, see the "Specifications 2 for Error Rate Measurement
(for continuous playback)" .
.
* For details on the OSD Filter screen, see the "OSD Filter Setting".
5
http://www.xiaoyu163.com
6
Press [DIG/ANA] key.
Version Data
OSD Filter
screen
screen
(Press [ESC] key
then [DISP] key.)
Press [TEST] key.
x
ao
u163
y
i
6
http://www.xiaoyu163.com
7
2 9
8
Q Q
3
6 7
1 3
1 5
Press [2] key.
Press [DISP] key.
Error Rate
Measurement
2 screen
(for continuous
Press [CX] key.
playback)
Press [3] key.
co
.
BDP-05FD
7
8
9 4
2 8
0 5
8
2 9
9 4
2 8
Press [DISP] key.
ATA/ATAPI
DEBUG OSD
command history
(ALL)
Press [CX] key.
m
8
9 9
A
B
C
9 9
D
E
F
33
Advertisement
Table of Contents
