Table of Contents
Advertisement
Note: The U170 device is powered by the USB bus and a single USB port can
provide power for only one U170 device with a mouse and keyboard. Adding
additional USB devices immediately downstream of the U170 that draw too
much power is likely to cause errors. Using a powered USB hub downstream
from a U170 for high power peripherals is recommended.
Connection Options
The U170 may be attached to a host PC through any USB 2.0-compliant connection method.
This includes the use of USB 2.0 hubs, USB 2.0 extension cables and USB 2.0 active
extenders. Each segment of a USB connection, from device to host PC, device to hub, or hub to
hub, must be no longer than 5 meters. The USB 2.0 specification states that a total of four hubs
may be used downstream of the host PC before the U170 device itself. Because the U170 is
dependent on USB bus power, you should always use a powered hub directly upstream of a
U170 when a U170 is not directly attached to a host PC. See the illustrations below for
reference.
USB Virtual Desktop (Model U170) User Manual
Page 10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VIRTUAL DESKTOP KIT U170 and is the answer not in the manual?
Questions and answers
dear sir i want software of u170 ncomputing deivice , please send setup file at ks210666@gmail.com
You can obtain the software setup file for the NComputing VIRTUAL DESKTOP KIT U170 by visiting the NComputing Software Download Center at the provided website. If you do not have internet access, you can use the CD installer.
This answer is automatically generated