Honda TRX700XX Owner's Manual page 191

If You Have a Flat Tyre
Emergency Wheel Removal/Installation
Refer to Saf ety Precautions
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
−
2. Loosen but do not remove
3. Raise the front (or rear) wheels off the ground and place a support
block under the vehicle.
4. Remove the wheel nuts.
5. Remove the wheel.
Avoid getting grease, oil, or dirt on the disc or pad surfaces when
removing and installing each wheel. Any contamination can cause
poor brake performance or rapid pad wear after reassembly.
Taking Care of the Unexpected
182
on page
(1)
81 .
(1)
(2)
(2) wheel rim
−
the wheel nuts ( ). 1