RX-V1065/HTR-6280/AX-V1065
Writing method using PC (RS232C)
● Required Tools
•
Firmware downloader program
For main microprocessor:
For DSP (TI flash ROM):
•
Firmware
For main microprocessor:
U model...U165xxxx.mot
C,R,T,K,A,B,G,E,F,L models...E165xxxx.mot
For DSP (TI flash ROM):
•
RS232C cross cable "D-sub 9 pin female"
(Specifications)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
•
RS232C conversion adaptor (Part No.: WR492800)
● Preparation and precautions
•
Download the firmware downloader program
and the firmware from the specified source to the
same folder of the PC.
•
Prepare the above specified RS232C cross cable.
•
While writing the firmware, keep the other application
software on the PC closed.
It is also recommended to keep the software on
the task tray closed as well.
26
DSP_FLASHER_v3.0.exe
DSP_FLASHER Ver2.7.exe
Vx65_data1_verxxxxxr.hex
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
PC(RS232C)を使用して書き込む方法
● 必要なツール
・ ファームウェア書き込み用プログラム
メインマイコン用:
DSP_FLASHER_v3.0.exe
DSP(TI fl ash ROM)用:
DSP_FLASHER Ver2.7.exe
・ ファームウェア
メインマイコン用:
E165xxxx.mot
DSP(TI fl ash ROM)用:
Vx65_data1_verxxxxxr.hex
・ RS232C クロスケーブル D-sub 9pin メス
(仕様)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
・ RS232C 変換アダプター(部品番号:WR492800)
● 準備と注意
・ 指定のダウンロード先から、ファームウェア書き
込み用プログラムとファームウェアを、PC の同
じフォルダへダウンロードしてください。
・ RS232C クロスケーブルは必ず上記仕様のものを
用意してください。
・ 書き込み時は、PC 上の他のアプリケーションソ
フトは閉じてください。
さらに、タスクトレイ上にあるソフトも閉じてお
くことを推奨します。
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS