Abus TVIP20000 User Manual page 124

The settings can be tested using the "Test" button. Accept the settings by
pressing "OK" or cancel them by pressing "Cancel".
Alarm sending
Alarm sending:
File attachment:
Image file name:
Suffix:
Delete sequence number:
Alarm:
Effective Period:
Always: The detectors for these alarms are permanently activated.
Schedule: The detectors for these alarms are activated at defined schedules. Press the
"Schedule" button to configure these settings (see also the "Schedule" section).
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
Periodical sending
Periodical sending:
Image file name:
Suffix:
Interval:
Effective Period:
Always: The detectors for these alarms are permanently activated.
Schedule: The detectors for these alarms are activated at defined schedules. Press the
"Schedule" button to configure these settings (see also the "Schedule" section).
Activates or deactivates the transmission of image data to an e-mail address
over an SMTP server.
Specify whether the e-mail should have an attached file here (image data).
Specify the file name for the image/video file here.
Select the file suffix here. This can be the date and time or a sequence
number.
Resets the sequence number to 1.
In the event of an alarm, certain reactions can be configured for SMTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
Specify the file name for the image/video file here.
Select the file suffix here. This can be the date and time or a sequence number (or no
suffix).
Specify the sending interval here. The minimum interval period is 30 minutes.
124
English