PURE Jongo A2 Manual page 16

Stage 3: Adding Jongo to your wireless network
Jongo will automatically scan for available networks. If you want to enter your
wireless network settings manually click Advanced.
1. Select the name of your own wireless network from the list of Available
networks.
2. If required, enter the security key used by your network and click Connect.
Jongo's Power light will pulse green while Jongo attempts to connect to your
network. When Jongo's Power light is steady green, Jongo has successfully
connected to your network. You will now be able to start streaming tracks to
Jongo. See the following page.
If the Power light flashes red, there is a problem with Jongo's network
connection. Check that you have entered your network settings correctly and
repeat the steps outlined on the previous page.
Note: We recommend that you contact your IT department before attempting
to connect Jongo to a corporate wireless network.
14