Using Wps - Asus RP-N53 Quick Start Manual

• Enter a name for the new Extender
network.
Option B: Using WPS (Wi-Fi Protected Setup)
1. Press the WPS button on the side of the Range Extender for more than two seconds, until the system
indicator flashes.
2. Press the WPS button on the router within two minutes.
NOTE: Refer to the router's manual for the location of the WPS button.
3. Check if the Range Extender's system indicator
turns into solid blue, which indicates that the
Range Extender has connected to the wireless
network successfully. The Range Extender's
wireless network name (SSID) changes to your
existing Wi-Fi network name, ending with _RPT
or _RPT5G. For example:
6
• Connect your wireless devices to the
new Extender network.