Asus RP-AX58 Quick Start Manual

Quick
Start Guide
RP-AX58
AX3000 Dual-Band WiFi Range
Extender
LED Explanations
WiFi Range Extender Mode
Status
Booting up
Booting up complete (not connected to
Router)
Reset (use a pin to press the reset
button for 5 seconds)
Rescue mode
Starting WPS
Connected to the router with Good
Signal
Connected to the router with Weak
Signal
No Signal
AP mode (with wired connection)
AP mode (without wired connection)
BEFORE SETUP
01
Placing your RP-AX58
Plug your RP-AX58 into a power outlet near
1
your router/AP.
SETUP METHODS
If you would like to connect RP-AX58 to other WiFi networks excluding AiMesh-supported routers, please download the
ASUS Extender App or set up with the WPS button.
1
METHOD
Download the ASUS Extender App
and follow the onscreen instructions
LED Behavior
Blinking White
Solid Blue
Blinking Yellow
Solid Purple
Blinking Blue
Solid White
Solid Yellow
Solid Red
Solid White
Solid Red
WE SUGGEST...
Check the LEDs and see the LED explanations.
2
around
2 meters
Set up RP-AX58 as a WiFi range extender
Hardware Explanations
Plug RP-AX58 into a power outlet.
1
2 The LED will start breathing white for 3 seconds while booting up.
Button Explanations
LED
WPS button
reset button
AiMesh Mode
Status
Booting up
Booting up complete (not connected to
AiMesh Router)
Reset (use a pin to press the reset
button for 5 seconds)
Rescue mode
Connecting to the AiMesh Router
Connected to the AiMesh Router with
Good Signal
Connected to the AiMesh Router with
Weak Signal
No Signal
Ethernet backhaul
3 Wait for the LED to flash and turn solid blue,
indicating that your RP-AX58 is ready to connect
to your existing router/AP.
2
METHOD
Connect via WPS
1
Press the WPS button on your router/
AP.
WPS BUTTON
Launch the WPS Wizard.
RESET BUTTON
Reset the system to its factory
default settings.
LAN PORT
Connect your PC to the LAN
LAN port port with a network cable.
LED Behavior
Blinking White
Solid Blue
Blinking Yellow
Solid Purple
Blinking Blue
Solid White
Solid Yellow
Solid Red
Solid White
NOTES: • To minimize interference, keep the routers away from
devices like cordless phones, Bluetooth devices and
microwave ovens.
• We recommend that you place the routers in an open or
spacious location.
2
Press the WPS button on your
RP-AX58 for more than two (2)
seconds until the LED starts to
blink blue.