Side Components - Navman 4100 User Manual

Side Components

4
1
Component
1 Battery Cover
2 Side Clip
3 Non-Slip Pad
External GPS Antenna
4
MCX Socket
Specifications
Property/Item
Size
Weight
Case
Internal Batteries
External Power Supply (optional)
Operating Temperature
Interface
GPS Antenna
GPS Receiver
Time to First GPS Fix
2
Description
Forms the base of the Bluetooth GPS Receiver and protects the internal
batteries.
Remove by squeezing the two side-clips while pulling the cover away from the
main unit.
Holds the battery cover in place.
Prevents the receiver from slipping when it is not in the receiver cradle.
If an external GPS antenna is plugged in, the Bluetooth GPS Receiver will use
the external antenna instead of the internal antenna.
Description
95 x 62 x 26 mm (3.7 x 2.4 x 1 in)
223 g (7.9 oz) without batteries
UV stable plastic
3 x AAA alkaline supplied
5 V DC, centre pin is positive
-10 to +60°C (14 to 140°F)
• Bluetooth™ Class 3
• Version 1.1 SPP (Serial Port Profile)
• Within 10 m (33 ft) range with no obstruction
• NMEA 0183 v.2.20, GPGGA, GPGSA, GPRMC and GPGSV
• Baud rate 57600
25 x 25 x 4 mm (1 x 1 x 0.2 in) ceramic patch
• SiRF low power chipset
• 12 channel parallel, automatic selection
• Hot Start - 8 seconds typical
• Warm Start - 38 seconds typical
• Cold Start - 45 seconds typical
5
Bluetooth GPS Receiver | User Manual
3