Bosch MXH180 Operating/Safety Instructions Manual page 12

BM 2610028025 05-13_BM 2610028025 05-13 5/20/13 2:39 PM Page 12
The variable speed control settings are
marked on the speed control dial. The
settings for approximate /min (OPM) are:
Switch Setting
1
2
3
4
5
6
BATTERy CHARGE CONDITION
INDICATOR LIGHTS
(Models BAT610G, BAT619G,
BAT620 & BAT612 only)
Your battery is equipped with charge condition
indicator lights (Fig. 4). The indicator lights
shows the charge condition of the battery
during operation.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 1 x green
Speed Range
/min (OPM)
8,000
10,400
12,800
15,200
17,600
20,000
Capacity
> 2/3
> 1/3
< 1/3
reserve
-12-
You can refer to the charts on next page to
determine the proper speed, based on the
material and accessory being used. These
charts enable you to select both the correct
accessory and the optimum speed at a glance.
To check the charge condition, press and hold
the charge condition indicator button with the
tool in the off position.
FIG. 4
CH RGE
CONDITION
INDIC TOR
BUTTON
B TTERY CH RGE
CONDITION INDIC TOR
LIGHTS