Table of Contents
Advertisement
4-4 Color setting
Adhere color Analyzer sensor closely to CRT center.
Video mode : 106kHz, 1600 mode.
1. Color Temperature 9300°K setting
- Select " 9300 " by using the menu key.
1) Cut-off Setting
• Video signal : Back Raster Pattern
• Adjust the brightness to 2.0 0.5 cd/m
• Press the Up/down key to get the desired R, G or B Cut-off.
• Press the Up/down key to limit the x and y color coordinate.
• Limits : x=0.283 0.02, y=0.297 0.02, Y=2.0 0.5 cd/m
2) Drive Setting
• Video signal : 2" square white box
• Select the "9300" by pressing the menu key.
• Adjust the brightness go to 80~100 cd/m
• Press the Up/down key to get the desired R or B drive.
• Press the Up/down key to limit the x and y color coordinate.
• Limits : x=0.283 0.02, y=0.297 0.02, Y=80~100 cd/m
3) Contrast Setting
• Adjust the brightness of 2" square white box by using the Up/down key in contrast.
• Limits : 130 5 cd/m
2. Color Temperature 6500°K Setting
- Select " 6500 " by using the menu key and Up/down key.
1) Cut-off Setting
• Video signal : Back Raster Pattern
• Select "Cutott" by pressing the Up/down key
• Adjust the brightness to 2.0 0.5cd/m
• Press the Up/down key to get the desired R, G or B Cut-off.
• Press the Up/down key to limit the x and y color coordinate.
• Limits : x=0.313 0.03, y=0.329 0.03
2) Drive, contrast Setting
•The method of Adjust is same to 9300°K.
•The color coordinate is x=0.313 0.03, y=0.329 0.03, Y=80~100 cd/m
3. ABL Setting
- Video signal : Full white
- Select "ABL" by using the menu Key and Up/down key.
- Adjust the brightness to 100~105 cd/m
4-5 Focus
Video Signal : Full "H" character pattern in 95kHz.
Adjust H/V Focus VR on the top of the FBT so that the image of whole screen looks
clear.
2
by using the Up/down key.
2
2
by using the Up/down key.
2.
by rotating the Adjust dial.
2
--17--
2
by using the Up/down key.
2
2
Advertisement
Table of Contents
