Working With The Map - Navigon MN4 User Manual

3.4

Working with the map

Survey
Displaying the map
Using the delivered
maps
Selecting a map
Operating the navigation software
There are various pieces of information available on the M
screen. Learn in this chapter about the possibilities for working
with the map, which depend on whether you are in navigation
mode, or not.
On the main screen, tap the Show map button to open the M
screen.
There are two CDs (CD-ROM2 und CD-ROM3) with additional
maps included in the delivery. If you wish to use one of those
maps on your navigation system, transfer the desired map from
the respective CD to a memory card using a memory reader.
Proceed then as described in "Selecting a map" (see below).
To load another map which is available on the currently inserted
memory card, proceed as follows:
Notice: If the desired map is on another memory card, remove
the card, which is currently inserted. MobileNavigator turns off.
Insert the card with the desired map. MobileNavigator turns on
again. Even if there is only one single map on the memory card,
you have to select it manually as described below.
1. On the main screen, tap the Choose map button.
The Available maps screen opens:
2. Tap the entry of the map you want to work with.
3. Tap OK.
The selected map is now loaded. The main screen opens.
User's manual BLUE Edition
AP
AP
- 44 -