Beaming An Application - Acer_test3 s50 User Manual

8 B e a m i n g i n f o r m a t i o n

Beaming an application

5
Beaming an application
1
2
3
208
• Tap Beam to beam an individual item.
• In the Address Book application only, tap Beam Business Card.
• Press the Address Book application button
your business card.
• Tap Beam Category (for records that are displayed in a category).
• Draw the Graffiti Command stroke to activate the toolbar, and then tap the
Beam icon .
• Use the Graffiti Command stroke /B to beam the current entry.
NOTE: You can set the full-screen pen stroke to beam the current entry. For instructions,
refer to "To change what the full-screen pen stroke activates" on page 235.
When the Beam Status dialog box appears, point the IR port directly at the IR port of
the receiving handheld.
TIP: For best results, handhelds should be between 10 centimeters (approximately
4 inches) and 1 meter (approximately 39 inches) apart, and the path between the two devices
must be clear of obstacles. Beaming distance to other Palm OS handhelds may be different.
When the Beam Status dialog box indicates that the transfer is complete, you can
resume working on your handheld.
To beam an application
In Applications Launcher, tap the Menu icon
Tap App, and then tap Beam.
Tap the application you want to transfer, and tap Beam.
for about two seconds to beam
.