Table of Contents
Advertisement
4 W o r k i n g w i t h y o u r s u p p l e m e n t a r y a p p l i c a t i o n s
Using Recorder
100
To pause Recording:
• Tap
. Button image changes to
shows Pause.
Tap
to continue with the recording.
To stop recording
• Press the power button.
When you turn on your Acer s60, the Recorder main screen will again be
displayed.
• Tap
or press the Multi-function button.
The screen reverts to the Recorder main screen.
The recorded audio will automatically be saved to the active storage medium.
Audio playback function
The Playback function allows you to play audio files, stored either in your Acer s60's
internal memory or in a Memory Stick.
You can listen to your audio files either through your Acer s60's built-in speaker or
through an earphone (included in the package contents) you connect to the earphone
jack found on of your handheld.
NOTE: You cannot use the both the earphone jack and the internal speaker at the same
time. Using one will disable the other.
Refer to "Front panel" on the Acer s50 and s60 Handhelds Quick Guide for the
location of the earphone jack and internal speaker.
During Playback mode:
• The Graffiti writing area is disabled and the LED indicator flashes red.
• Tapping any of the application buttons will stop playback and terminate the
Recorder operation. Application assigned to the pressed button will be
launched.
, LED indicator stops blinking, and status
Advertisement
Table of Contents
