Audio Description - OK. OLE 396 B-D4 User Manual

Chapter 4 & 5
- Select Digital, then follow the same process
as above to start your automatic search
relating to all DVB-C digital channels.
- Select Analogue, then press OK/► to
start your automatic search relating to all
analogue channels.
4. The search may take a few minutes. During the
process, you can press Menu to abort halfway.
5. Once the automatic search ends, press Menu
to return to the previous step or press OK to
restart your channel search.
6.
After the automatic search, channels are arranged
in a preset order. You can skip channels, modify
the preset order or rename channels.
Using your TV
Accessing channels
Using the numeric buttons: press the
corresponding numeric
channels.
Using the PR+/- or P+/- buttons: scroll through
the channels.
Watching connected devices
Repeatedly press Source on the remote control
or OK on the TV set to toggle between TV and
other input sources. To resume TV viewing, press
any numeric button to enter the channel, while
P+/- will cycle through all TV channels and other
input sources.
Note: Not all models have OK button on the set.
Volume
Volume control: use the VOL+/- or VOL◄/►
buttons on the TV set or V+/- buttons on the
remote control to increase or decrease the volume.
Sound mute: press the Mute button to
temporarily mute the sound. Press this button
again or the V+ button to restore it.
Using TV menus
1. Press Menu to display the main menu. (Refer
to Figure 3.)
2. Press ▲/▼/◄/ ►to select the desired item,
then press OK to open the corresponding
submenu.
3. In submenus, use ▲/▼ to select menu options,
use ◄/ ► to set functions or change values.
Use OK to activate a setting. Use OK/► to
open the corresponding submenu.
4. Press Menu to return to the previous menu.
5. Press Exit to close the menu.
Note: Some options may not be available for
certain signal sources.
Selecting menu language
You can choose your preferred menu language
following the instructions below.
buttons to access the
Using your TV & Using more of your TV
1. Press Menu to display the main menu.
2. Press ▲/▼/◄/ ►to select Setup, then press
OK to enter.
3. Select Language and press OK/► to enter.
4. Select Menu language and press ◄/► to select
your desired language to display the menus.
5. Press Exit to close the menu.
Using more of your TV
Setting up your favourite channels
You can create a list
1. Press LIST.
2. Press the yellow button to enter Channel list
selection. Press ▲/▼ to select the favourite
list and press OK to enter.
3. Press the blue button to start editing your
favourite list. Press ▲/▼ to scroll through the
channel list and press OK to select or deselect it.
4. Repeat this procedure to setup other favourite
channels.
5. Press LIST/Exit to exit.
Energy saving
1. Press Menu on the remote control and select
Picture > ECO settings > Energy saving.
2. Press ◄/► to select desired power saving
mode to achieve the desired power saving
effect.
3. Press Exit to close the menu.
Shortcut operation: Press ECO on the remote
control to perform the same function mentioned
above.
Motion enhance (* not available for some models)
This function provides more sharpness to moving
pictures and launches the desired demonstration.
1. Press Menu on the remote control and select
Picture > Advanced settings >
Motion enhance.
2. Press OK/► to enter.
3. Select different options:
- Effect: Choose the high level to keep the
picture sharp at all times; however, very
small details may fade slightly at high speed.
You can also choose the low or middle levels
to reduce the motion compensation.
- Demo partition: Select the mode in which
you want to demo the effect of motion
enhancement.
- Demo: Start the demo by pressing OK/►.
4. Press Exit to close the menu.

Audio description

Audio description refers to an additional narration
track for Blind and visually impaired viewers of
visual media, including television programmes
and movies.
EN 9
of your favourite TV channels.