Troubleshooting - Intenso Music Dancer Manual

7.

Troubleshooting

No sound during playback of a file.
(1) The volume is too low. Increase the volume.
(2) The audio file is defective. Please transfer the file again.
No connection can be established with the PC.
(1) The driver was not installed properly. Re-install the driver.
(2) Please carry out a main board update.
(Please refer to the manufacturer`s instructions)
The computer shows an error message saying that it is not possible to transfer
data to the player
(1) The player has been disconnected from the computer during data transfer.
Please do not disconnect the player during data transmission.
The memory indicated by the player does not match the actual memory.
(1) Part of the memory is used for software and display properties.
MP3 data is not played properly.
(1) The MP3 data was compressed in a wrong format, e.g. in MPEG 1 or 2.
Delete the file formats that are not supported.
It is not possible to charge the player's battery.
The ON/OFF switch is in "Off" position.
(1)
Move the ON/OFF switch into "ON" position.
Downloaded from ManualMPlayer.com Manuals
Page 5 of 6 GB