Playback Settings (Playback); Hdmi Settings (Hdmi Output) - Sony RDR-GX350 Service Manual

QQ
3 7 63 1515 0
Auto Chapter (Video) (DVD-RW/DVD-R in
Video mode only)
No No chapter mark is inserted.
Separation
10 minutes Inserts chapter marks at
approximately 10-minute
intervals.
15 minutes
Inserts chapter marks at
approximately 15-minute
intervals.
Auto Chapter (DVD+R/+RW) (DVD+RW/
DVD+R only)
No No chapter mark is inserted.
Separation
10 minutes
Inserts chapter marks at
approximately 10-minute
intervals.
15 minutes Inserts chapter marks at
approximately 15-minute
intervals.
HDD Recording Format
Selects the HDD recording format.
Video Mode
Records to the HDD in VR
Off mode.
When recording stereo and
bilingual programmes, both
main and sub sounds can be
recorded.
Video Mode Records to the HDD in
On
Video mode.
When recording stereo and
bilingual programmes, only
one sound track (main or
sub) can be recorded.
Set "Bilingual Recording"
to "A/L" (default) or "B/R"
in the "Audio In" setup
(page 116).
z Hint
The HDD contents recorded in Video mode can be
dubbed to a disc at high speed (page 78).
TE
L 13942296513
122
6
Select "Code" (geographic area) as the
playback limitation level, and press
ENTER.
The area is selected.
• When you select "Number," press the
number buttons to select and enter a
country/area code in the table
(page 147), and press ENTER.
7
Select "Change Level," and press
ENTER.
The "Parental Control : Change Level"
display appears.
8
Enter your four-digit password using the
number buttons, and press ENTER.
9
Select the level.
The lower the value, the stricter the
limitation.
Discs rated higher than the selected level
will be restricted.
10
Press ENTER.
The Parental Control setting is complete.
To cancel the Parental Control setting for
the disc, select "Off" in step 9.
Change Password
1
Select "Parental Control" in "Playback,"
and press ENTER.
2
Select "Change Password," and press
ENTER.
3
Enter your four-digit password in the
"Current Password" row using the
number buttons, and press ENTER.
4
Enter a new password in the "New
www Password" row using the number
buttons, and press ENTER.
.
124
http://www.xiaoyu163.com
Playback Settings
(Playback)
The "Playback" setup allows you to adjust
the playback settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Initial Setup," and press
ENTER.
3
Select "Playback," and press ENTER.
The "Playback" setup appears with the
following options. The default settings
are underlined.
TV Type
Select the playback picture size according to
the type of connected TV (wide-screen/wide
mode TV or conventional 4:3 screen TV).
4:3 Letter Box Select this when connecting
to a 4:3 screen TV. Displays
a wide picture with bands
on the upper and lower
portions of the screen.
4:3 Pan Scan Select this when connecting
to a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
16:9 Select this when connecting
to a wide-screen TV or TV
with a wide mode function.
b
Notes
• If you forget your password, reset the recorder
(page 136).
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this recorder.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
Angle Indicator (DVD VIDEOs only)
On
Displays " " on the TV
screen if various angles
(multi-angles) for a scene
are recorded on the disc.
Off
Does not display " " on
the TV screen.
x ao
y
i
http://www.xiaoyu163.com
8
4:3 Letter Box
4:3 Pan Scan
16:9
b
Note
Depending on the disc, "4:3 Letter Box" may be
selected automatically instead of "4:3 Pan Scan" or
vice-versa.
Pause Mode
Selects the picture quality in pause mode.
Field
Outputs a stable, generally
shake-free image.
Frame
Outputs a sharp image, but
may be prone to shake.
Auto Outputs a generally less
sharp but more stable still
image.
Seamless Playback (HDD/DVD-RW/DVD-
R in VR mode only)
On Playback is smooth, but
with a trade-off against the
accuracy of the edit points.
Off You may notice momentary
interruption at edited points
during playback of a VR
mode Playlist.
Q Q
3 6 7 1 3
HDMI Settings (HDMI
Output)
The "HDMI Output" setup allows you to
adjust items related to the HDMI connection.
You can select "HDMI Output" only when
connecting equipment to the HDMI OUT
jack.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select "Initial Setup," and press
ENTER.
3
Select "HDMI Output," and press
ENTER.
The "HDMI Output" setup appears with
the following options. The default
settings are underlined.
After connecting equipment to the HDMI
OUT jack, "Screen Resolution," "4:3
Video Output," and "Colour" are
automatically set to the appropriate
settings.
Screen Resolution
Selects the type of video signals output from
the HDMI OUT jack. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the disc and your
TV/projector, etc. For details, refer also to the
instruction manual supplied with the TV/
projector, etc.
1920 x 1080p Sends 1920×1080p video
u163
signals.
1920 x 1080i Sends 1920×1080i video
signals.
.
1280 x 720p Sends 1280×720p video
signals.
1-30
2 9 9 4 2 8
Parental Control (DVD VIDEO only)
Playback of some DVD VIDEOs can be
limited according to a predetermined level,
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
1
Select "Parental Control" in "Playback,"
and press ENTER.
When you have already registered a
password, go to step 3.
2
Select "Set Password," and press
ENTER.
The display for registering a new
password appears.
3
Enter your four-digit password using the
number buttons, and press ENTER.
4
Select "Standard," and press ENTER.
The "Parental Control : Standard"
display appears.
5
Enter your four-digit password using the
number buttons, and press ENTER.
1 5 0 5 8 2 9 9 4
,continued
*1
720 x 576p Sends 720×576p video
signals.
*2
720 x 480p Sends 720×480p video
signals.
*1
720 x 576i Sends 720×576i video
signals.
*2
720 x 480i Sends 720×480i video
signals.
*1
Can be selected only when "Input Line System"
is set to "PAL/SECAM" in the "Basic" setup
(page 110).
*2
Can be selected only when "Input Line System"
is set to "NTSC" in the "Basic" setup (page 110).
b
Notes
• When picture noise appears after you change the
"Screen Resolution" setting, hold down x (stop)
on the recorder, and press Z (open/close) on the
recorder.
• When "Colour" is set to "YCbCr 4:2:2" in the
"HDMI Output" setup, you cannot select "720 x
576i" (or "720 x 480i").
4:3 Video Output
This setting is effective only when you set
"TV Type" to "16:9" in the "Playback" setup.
Adjust this setting to watch 4:3 aspect ratio
signals. If you can change the aspect ratio on
your TV, change the setting on your TV, not
this recorder.
Note that this setting is effective only for
HDMI connection.
Full Select this when you can
change the aspect ratio on
your TV.
Normal Select this when you cannot
change the aspect ratio on
your TV. Shows a 4:3 size
video with the aspect ratio
as it is.
m
co
16:9 aspect ratio TV
,continued
9 9
2 8 9 9
123
125