Maintenance - Ryobi ETMS1825HG Original Instructions Manual

Do not cut metals
Cutting capacity
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.

MAINTENANCE

■ Do not make any adjustments while the motor is in
motion.
■ Always make sure the machines plug has been removed
from the mains power source before changing brushes,
lubricating or when doing any works or maintenance on
the machine.
■ After each use, check your machine for damage or
broken parts and keep it in top working condition by
repairing or replacing parts immediately.
■ Clean out accumulated dust.
■ To assure safety and reliability, all repairs with the
exception of externally accessible brushes should be
performed by an authorised service centre.
■ Faults in the machine, including guards or saw blades,
should be reported as soon as they are discovered.
■ If the power supply cord is damaged, it must be replaced
only by the manufacturer or by an authorized service
center to avoid risk. Contact authorized service center.
WARNING
For greater safety and reliability, all repairs should be
performed by an Authorised Ryobi Service Centre.
4
English