Ryobi ERS800K Owner's Operating Manual
Ryobi ERS800K Owner's Operating Manual

Ryobi ERS800K Owner's Operating Manual

Reciprocating saw

Advertisement

OWNER'S OPERATING MANUAL

SPECIFICATIONS :

Voltage.......................240 V
Input...........................800 watt
Strokes Per Minute....2,800 min
Cutting Capacity
in wood..................75 mm
Length Of Stroke........3 cm
Net Weight ................2.9 kg
THANK YOU FOR BUYING A RYOBI RECIPROCATING SAW
Your new reciprocating saw has been engineered and manufactured to Ryobi's high standard
for dependability, ease of operation, and operator safety. Properly cared for, it will give you
years of rugged, trouble free performance.
CAUTION: Carefully read through this entire owner's manual before using your
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions.
If you use your reciprocating saw properly and only for what it is intended, you will enjoy
years of safe, reliable service.
Thank You again for buying Ryobi tools.
RECIPROCATING SAW
MODEL ERS800K
50 Hz
-1
reciprocating saw.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
D O U B L E
D O U B L E
D O U B L E
D O U B L E
D O U B L E
I N S U L A T E D
I N S U L A T E D
I N S U L A T E D
I N S U L A T E D
I N S U L A T E D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ERS800K and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ryobi ERS800K

  • Page 1 Net Weight ....2.9 kg THANK YOU FOR BUYING A RYOBI RECIPROCATING SAW Your new reciprocating saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble free performance.
  • Page 2: Save These Instructions

    RULES FOR SAFE OPERATION The purpose of safety rules is to attract your attention to 9. DRESS PROPERLY. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber possible dangers. The safety symbols and the explanations gloves and non-skid footwear are recommended when with them, require your careful attention and understanding.
  • Page 3 FEATURES BLADE VARIABLE SPEED DIAL SHOE ASSEMBLY TRIGGER SWITCH Fig 1. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
  • Page 4 OPERATION WARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. TURNING THE SAW ON/OFF See Figure 2.
  • Page 5 OPERATION OPERATING THE SAW See Figure 5. Follow these directions to operate the saw. Secure the workpiece to a work bench or table with a vise or with clamps. Make sure the saw blade is clear of any foreign material and that the power cord and extension cord are out of the blade path.
  • Page 6 OPERATION METAL CUTTING See Figure 7. You may cut metals such as sheet steel, pipe steel rods, aluminum, brass, and copper with your saw. Observe the following tips when metal cutting. Be careful not to twist or bend the saw blade. Do not force the tool.
  • Page 7 RYOBI NEW ZEALAND PTY. LTD. AUCKLAND: 503 Mt Wellington Highway, Mt Wellington, N.Z. Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - Email: info@ryobi.co.nz Contact during normal business hours. This Guarantee Form Should Be Retained By The Customer At All Times For your record and to assist in establishing date of purchase (necessary for in-guarantee service) please keep your purchase docket and this form completed with the following particulars.

Table of Contents