Installation - Electrolux EHF6240XOK User Manual

7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also three
digit letter code for the glass ceramic (it is
in the corner of the glass surface) and an

8. INSTALLATION

8.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Serial number ...........................
8.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in units
8.4 Assembly
WARNING!
Refer to Safety chapters.
min.
500mm
error message that comes on. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about
the Service Centre and conditions of
guarantee are in the guarantee booklet.
and work surfaces that align to the
standards.
8.3 Connection cable
• The hob is supplied with a connection
• Replace the damaged mains cable with
min.
50mm
min.
55mm
cable.
a special cable (type H05BB-F Tmax
90°C; or higher). Speak to your local
Service Centre.
R 5mm
+1
490 mm
560
ENGLISH 23
+1
mm