Panasonic BB-HCM311A Installation/Troubleshooting Manual page 22

Installation/Troubleshooting
3.
Click [Automatic Setup (Internet Access)].
Note
In order for Internet access to be properly enabled, your router's UPnP
feature should be enabled. Most router manufacturers disable this feature. See
http://panasonic.co.jp/pcc/products/en/netwkcam/ for more information.
4.
Enter the user name and password that were set, and click [OK].
22
Sets up the camera to view on
the LAN.
Sets up the Internet access to
the camera.
Manually sets up the camera.
Disables IPsec. If disabled, the
button is displayed gray.
Displays the Setup page (see
page 38 of the Operating
Instructions on the Setup CD-
ROM).
TM