Electromagnetic Compatibility - National Instruments NI 9403 Operating Instructions Manual

Electromagnetic Compatibility

This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement,
control, and laboratory use:
• EN 61326 EMC requirements; Industrial Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Note
shielded cabling.
CE Compliance
This product meets the essential requirements of applicable
European directives, as amended for CE markings, as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive
(EMC)
Note
this product for any additional regulatory compliance
information. To obtain the DoC for this product, visit
© National Instruments Corp.
For EMC compliance, operate this device with
Refer to the Declaration of Conformity (DoC) for
19 NI 9403 Operating Instructions and Specifications