Countdown Mode - Honeywell HVC0001 Owner's Manual

Countdown Mode

Place the controller in Countdown Mode to run the fan for 10-60 minutes. The fan turns On when the
controller is in this mode. At the end of the countdown time, the controller returns to its programmed mode
and the fan turns Off. (NOTE: The fan might stay On if the controller has been set to turn the fan On at
that given time in the programmed mode.)
You can cancel the Countdown Mode and return to the programmed mode at any time by pressing the
main button.
To place the controller in Countdown Mode, proceed as shown:
Normal Display
Set Countdown
Time (minutes) *
At end of Countdown Mode
After
5 sec.
Countdown Mode
is activated
* Press the left or right button once
to use the same countdown time
as the one used the last time.
Press the left (-) or right (+) button
more than once to decrease or
increase the countdown time (in
increments of 5 minutes).
17
HVC0001/HVC0002
_ +