Charging The Pda - Metrologic Optimus PDA SP5700 Series Quick Start Manuals

Charging the PDA

Insert the handset into the cradle as shown below. To avoid damage to the charging connector do not force
the PDA into the cradle.
A spare battery can be inserted in the rear slot of both cradles and charged simultaneously.
1-Slot Cradle
Before using the PDA for the first time or when the unit has not been used for a long period of time, charge the
battery for at least 3 hours and then perform a Hardware reset (see Software/Hardware reset section)
The charging indicator on the top of the PDA shows the current charge
status. The LED on the charger displays the spare battery charging status
Vehicle Cradle
The LED light on the Vehicle Cradle and Trigger Handle indicates power is on.
The current charge status is indicated by the charging indicator on the PDA.
Optimus PDA SP5700series Quick Start Guide
X
OK
Charging Status
Press Lock Key
when removing
the PDA
4-Slot Cradle
Red – Now Charging
Status
Green – Charging Completed
Trigger Handle
Press Lock Key
when removing
the PDA