Blade Drive; Tire Size; Tire Pressure; Mower Deck - Walker B23i Operator's Manual

Specifications
MODEL
TRANSMISSION (continued)
Parking Brake
Neutral
Final Drive
Transmission Fluid
Factory Service
Transmission Oil Capacity fl oz (L)
Transmission Cooling
Oil Filter
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)

BLADE DRIVE

PTO Shaft
Blade Drive Clutch and Brake

TIRE SIZE

Deck Caster
Drive
Tailwheel
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel
Drive
Tailwheel

MOWER DECK

Recommended Cut Width
Side Discharge
Mulch
Cutting Height
Deck Suspension
4
B23i
Internal Mechanical Cog Lock for each Transaxle
(Single Lever Control)
Transmission Release by Manual Dump Valve
Transaxle Direct to Drive Wheel
20W-50 Multi-Viscosity Motor Oil (Minimum SL Grade Oil)
79 (2.3)
Cooling Fan Mounted on Drive Pulley
Hydro-Gear P/N 52114 (Walker P/N 2026-6)
®
0-8 (0-13) Infinitely Variable
0-5 (0-8) Infinitely Variable
Quick Disconnect Splined Shaft with Two (2) High-Speed U-Joints
Manual Belt Tightener Clutch and Band Brake
[Stops Blades within Five (5) Seconds of Disengagement]
8 x 3.00-4 (Pneumatic 4-Ply, All Decks Except DS52, DS62, DS74)
11 x 4.00-5 (Pneumatic 4-Ply, DS52, DS62, DS74 Only)
18 x 8.50-10 (Pneumatic 4-Ply Low-Profile)
11 x 4.00-5 (Pneumatic)
20 (137)
15 (103)
20 (137)
36 to 74 in. (91 to 188 cm)
36 to 52 in. (91 to 132 cm)
1 to 4 in. (2.5 to 10 cm) or 1.5 to 4.5 in. (4 to 11.5 cm)
(DS52 and DS62 Belt Driven SD Decks Only)
Independent Torsion-Flex Frame with Caster Wheels and
Counterweight Springs