Connecting With A Bluetooth Device; Troubleshooting - ION rock block User Manual

Features
1. Power – Press this button to power Rock Block/ Mini
Block Rocker on and off. The power button LED shows
the state of the Bluetooth connection. See the Rock
Block/ Mini Block Rocker LED activity box for more
details.
Note: Rock Block/ Mini Block Rocker will turn itself off
after 5 minutes of no audio playing through either
Bluetooth or the aux input. To continue to use Rock
Block/ Mini Block Rocker, power on the unit by
pressing the power button.
2. Volume Down/Up Controls – Press these buttons to decrease
or increase the volume level for the aux input and Bluetooth
sources. Rock Block/ Mini Block Rocker defaults to 2/3 volume
when it is turned on. Please adjust the volume using your
device's volume controls and Rock Block/ Mini Block Rocker's
volume buttons.
3. Next Track – Press this button to advance to the next track
when listening to Bluetooth sources.
Note: In some apps, pressing the Next button may advance to
the next playlist or music genre.
4. Unpair Button – Press this button to disconnect from a
connected Bluetooth source.
5. Battery Charging LED – This shows the charge status. When
charging, it will be on, when fully charged or not plugged into a
charge cable, it will be off.
6. Micro-USB Charging Port – Connect the included micro-USB
cable to connect Rock Block/ Mini Block Rocker to a USB
power adapter connected to a power outlet or to your computer.
7. Aux Input – Connect the output of an MP3 player or other audio source to this input.

Connecting with a Bluetooth Device

1. Power on Rock Block/ Mini Block Rocker.
2. Turn on your Bluetooth device.
3. Navigate to your Bluetooth device's setup screen, find "Rock Block/ Mini BlockRocker" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
4. Play music and adjust Rock Block/ Mini Block Rocker's volume buttons.
Note: If you experience trouble connecting or playing music, update your device's OS.
5. To disconnect a connected Bluetooth device, press the Unpair button on Rock Block/ Mini Block
Rocker.

Troubleshooting

If the sound is
Also, try to reduce the overall volume of Rock Block/ Mini Block Rocker.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
distorted: Try lowering
1 2 3
the volume control
3
4
7
Power Button
activity:
Solid Red LED = No
Bluetooth connection.
Solid Blue LED
Bluetooth connected.
Blinking Red LED =
Battery is low and needs
to be recharged
Bluetooth connection).
Blinking Blue/Purple
LED = Battery is low and
needs to be recharged
(Bluetooth connected).
of your sound
5
6
LED
=
(no
source.