Installing The Software; Basic Operations - Targus Bluetooth 4.0 adapter User Manual

Targus Bluetooth 4.0 Micro USB Adapter
®

Installing the Software

1 Insert the driver software CD into your computer's optical drive.
2 Follow the on-screen instructions.
3 When the "Bluetooth Device Not Found" or "No Bluetooth device was
detected" window appears. Insert the USB Bluetooth adapter in the USB
port.
NOTE: Do not conect the Adapter to your computer until the software drivers are installed.
4 Follow the on-screen instructions then click Finish to complete the
installation.
If your computer does not have an optical drive, you can download the latest driver from
www.targus.com

Basic Operations

Start or Stop Bluetooth
To start Bluetooth
In the Windows system tray, right-click the Bluetooth icon and select Start the
Bluetooth Device / Turn Adapter On. The Bluetooth icon is blue in colour with
a white insert when the Bluetooth software is running.
To stop Bluetooth
In the Windows system tray, right-click the Bluetooth icon and select Stop the
Bluetooth Device / Turn Adapter Off. The Bluetooth icon is blue in colour with
a red insert when Bluetooth is stopped.
6
Targus Bluetooth
Verifying the Adapter is Installed
After installing the adapter software (for Vista / 7):
1 Click Start/Control Panel/Hardware/Device Manager.
2 Check under 'Bluetooth Radios' that a 'Broadcom BCM 20702 Bluetooth
4.0 USB device" is installed.
After installing the adapter software (forXP):
1 Click Start/Settings/Control Panel/System/Hardware/ Device
Manager.
2 Check under 'Bluetooth Devices' that a 'Broadcom BCM 20702
Bluetooth 4.0 USB device / USB device" is installed.
If the information is not present:
1 Unplug the adapter
2 Plug the adapter into the USB port to initiate the driver. Verify that the
adapter is installed.
You are now ready to configure the Bluetooth.
4.0 Micro USB Adapter
®
7