Magellan M-Nav 800 Quick Start Manual page 6

Navman Wireless.fm Page 6 Friday, November 18, 2011 9:38 AM
Attach the DB-9 Power Cable.
The DB-9 cable connects the receiver
to the Navman Wireless assembly.
Attach the DB-9 connector to the
receiver cradle and RJ45 to the
Navman Wireless Power/Serial
Module.
The additional connector is used
to connect to an external antenna
(not included) to receive traffic information.
C
Power On
Press and hold the power button 2 - 3 seconds to turn the receiver on or
off. Press and hold the power button for more then 5 seconds to reset
the receiver should you have a problem with the receiver and are
instructed to reset the receiver.
The first time you use the Magellan RoadMate it may take up to 4
minutes to compute your location under normal conditions. With
adverse conditions (not having a clear view of the sky) the time to
compute your location the first time can greatly increase.
Magellan RoadMate
A B
A - Power Button
B - Micro-SD slot
(under protective
cover)
C - Mini USB for
optional power or
connecting to a PC