Checking & Repairing Dvd Module - Panasonic SA-PT560E Service Manual

SA-PT560E / SA-PT560EB / SA-PT560EG
Step 9 Detach Main P.C.B. from the rear panel and position it
according to the diagram shown.
Step 10 Remove 5P USB cable (USB P.C.B. to DVD Module
P.C.B.) from the small wire holder.
Step 11 Remove 8P cable (SMPS P.C.B. to D-Amp P.C.B.)
from the big wire holder.
Step 12 Remove 2 screws on Power Supply P.C.B.
Step 13 Detach Power Supply P.C.B. from the bottom chassis
and flip it vertically.
Step 14 Position Main P.C.B. according to the diagram shown.
Step 15 Attach original cable with extension cable REXX0653-
J (13P cable from CN2015 to CN2016)
Step 16 Connect 13P cable at the connector (CN2016) on
Power Supply P.C.B.
Step 17 Connect 28P cable at the connector (CN6001) on
Power Supply P.C.B.
Step 18 Connect 17P cable at the connector (CN2007) on
Main P.C.B.
Step 19 Connect 4P cable at the connector (CN2013) on Main
P.C.B.
Step 20 Position Power Supply P.C.B. according to the
diagram shown.
12.5. Checking & Repairing DVD
Module P.C.B.
• • • • Servicing Side A of DVD Module P.C.B.
Step 1 Remove the top cabinet.
Step 2 Remove the rear panel.
Step 3 Release the catches and remove the fan unit.
74