Soyntec SEKURY C 800VA User Manual

User Manual
SEKURY™ C 800VA
1. Introduction
SEKURY™ C includes a software which can remote and control UPS through
LAN, get warning notifications through broadcast and mobile phone,
multi-shutdown PCs and schedule UPS self-test. This unique software provides
complete power protection for computer system while power failure.
The line of UPS provides boost and buck AVR to stabilize input voltage and full
protection to your computers and peripheral devices such as scanners, monitors,
modems, etc. from losing valuable data as a result of power failures. In the event
of a utility failure such as a blackout, brownout, or power sag (when the lights in
a room dim for a moment), the UPS rapidly transfers your computer equipment
to an alternative power source. This allows you adequate time to save files, exit
programs, and properly shut down your system.
Under normal conditions, when the available AC voltage is within limits that are
appropriate for your equipment, the SEKURY™ C UPS maintains it's battery
charge, and otherwise remains invisible in it's operation.
When the power supply is transferred from utility (AC) power to backup
(battery-DC) power, the waveform is altered, with minimal transfer time from a
normal sine wave to a step sine wave. According to research, a rough wave
transition or an imperfect step sine wave could cause a voltage transient.
Eventually, this voltage transient could damage the MOS circuitry within the UPS,
and decrease its life. The UPS surpasses the competition in producing the
smoothest transition from sine wave to step sine wave.
1