Safety Tips; Introduction - Buffalo GH489 Instruction Manual

Safety Tips

T
HE
USED BY TRAINED PERSONNEL IN ACCORDANCE WITH THESE INSTRUCTIONS
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
• Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• DO NOT place hands near the blade when in use. This can result in severe injury.
• DO NOT touch the blade edge.
• DO NOT remove food from the appliance until the blade has come to a complete stop.
• DO NOT immerse the appliance in water.
• DO NOT attempt to cut bones or frozen food. This can damage the blade.
• DO NOT operate the appliance for longer than 10 minutes at a time. Allow at least 5 minutes for the
appliance to cool before using again.
• Always set the thickness knob to '0' when not in use.
• Always switch off and disconnect the power supply to the appliance when not in use.
• NEVER leave the appliance unattended when in use.
• This appliance must only be used in accordance with these instructions and by persons competent to
do so.
• This appliance is not suitable for use by children.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
• If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified
technician in order to avoid a hazard.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the apliance by a person reponsible for their safety.

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.
1
E S
LECTRIC LICER IS A HAZARDOUS APPLIANCE AND MUST ONLY BE