System, etc. setting procedure
1) System Reset
a) press and hold "TUNER" and""ALBUM-" key
b) power on
c) VFD will display "VXXX-X"
d) Press""PROGRAM" key, VFD display "NEW"
2) Check on the Software Version
a) press and hold "TUNER" and""ALBUM-" key
b) power on
c) VFD will display "VXXX-X"
3)Updating new software
a) insert USB
b) press "USB" key to select USB mode
c) press and hold "STOP" key
d) VFD will display "UPGRADE"
e) when finishing upgrade ,system will automatic go to
standby mode
CAUTION !
This information is confidencial and may not
be distributed. Only a qualified service
person should reprogram the Region Code.
2 - 1
2 - 1