Central Pneumatic 68067 Owner's Manual & Safety Instructions page 11

BREAKING IN THE PUMP
See Figures 7 - 8.
Check and tighten all bolts, fittings, etc.
Turn the pressure regulator knob fully clockwise to
open the air flow.
Press the red button of the On/Off switch and plug in
the power cord.
Open the drain valve completely.
Pull out the red button of the On/Off switch and run the
air compressor for 10 minutes to break in pump parts.
Press in the red button of the On/Off switch.
Close the drain valve.
Item 68066
ASSEMBLY
For technical questions, please call 1-888-866-5797.
QUICK REGULATOR
COUPLER PRESSURE
GAUGE
PRESSURE SAFETY
REGULATOR VALVE
KNOB
DRAIN VALVE
TANK
PRESSURE
GAUGE
PRESSURE
SWITCH
ON/OFF
SWITCH
Fig. 7
Fig. 8
Page 11