Helpful Tips When Using The Dough Blade; General Tips For Using The Processor - Farberware FP3200FBS Instruction Manual

12-cup food processor with 4-cup nested workbowl
Table of Contents

Advertisement

Available languages

Available languages

USING THE DOUGH BLADE
Important: The dough blade can only be used with the large
workbowl. Only run the processor on LOW speed when using the
dough blade.
1. Lock large workbowl onto base.
2. Place dough blade on blade shaft and turn it clockwise to
lock it onto bottom of shaft. You will feel it lock into place. (N) Push dough blade and shaft
down onto center post in workbowl until it is fully seated.
3. Insert all the dry ingredients into the workbowl.
4. Place cover on workbowl. Secure large and small food pushers in feed chute and process
on LOW speed.
5. With appliance running, add liquids through the opening in the large food pusher. When
finished, press OFF|PULSE to stop the blade. Twist lid
clockwise to remove.
Important: Allow the blade to stop revolving completely and
unplug before removing lid.
6. To unlock workbowl, turn it clockwise and lift off base.
7. Carefully remove dough blade by pulling shaft straight up
and empty workbowl. To remove dough blade from shaft,
turn blade counterclockwise and lift off the shaft (O).
8. Unplug appliance when not in use.

HELPFUL TIPS WHEN USING THE DOUGH BLADE

For best results do not prepare recipes using more than 3½ cups flour.
Begin with 1 cup less than the maximum amount of flour and add additional flour, as
needed, once mixture is well blended.
Pour liquid through the opening in the large food pusher in a slow steady stream.
Knead dough no longer than one minute.
Do not leave processor unattended during operation.

GENERAL TIPS FOR USING THE PROCESSOR

Organize processing tasks to avoid multiple cleanups of the bowl; process dry before wet.
The processor will be more efficient if filled no more than
If shredded, sliced or diced food piles up on one side of the bowl, stop the processor and
redistribute the food using a spatula.
To take advantage of the speed of the processor, drop foods through the feed chute with
the processor running.
To minimize slender foods, such as carrots or celery, from falling over in the feed chute, cut food
into several pieces and pack the feed chute with the food.
/
1
2
10
N
O
to
/
full.
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents