Samsung D61B Training Manual page 95

Glossary
Reset :
(Refer to erase.)
Reset discharge, Reset pulse :
(Refer to erase.)
Resolution :
Display's ability to enable to distinguish the matters close to each other. It is confusing with addressibility
that generates pattern undistinguishable to the eyes.
Row electrodes :
Horizontally successive electrodes. In terms of traditional drive concept, these are the sustained electrodes.
If the panel is installed toward portrait, these row electrodes can be arranged horizontally.
Sand discharge :
Process where grinding of surface occurs. It is used for making three dimensional surface in lithography or
silt in sheet.
Scan discharge :
Discharge injected along the pair of sustained electrodes.
Scan electrode :
Electrodes of the pair of sustained electrodes that inject discharge downward along the panel columns.
Scan pulse :
Waveform that injects discharge with new columns.
Optic defects where scratches display over certain size.
Seal :
Combining the substrates or substrate with ventilation tube.
Seal layer :
Material layer that provides the connection of substrates. This can be a single layer of solder glass (frit) or
the combination of solder glass and ring.
Sealing :
Process where free electrons that get out of the surface by extracting static electricity field when energetic
electrons or ions are limited to a surface.
Secondary electron emission :
Process where drags discharged cell to certain waveform. This could occur before ionization offset when
cell voltage decreases.
Self erase :
Plasma display in the form where stimulating discharge occurs for discharge process precedes below panel.
Self-scan type PDP :
Plasma display in the form where stimulating discharge occurs for discharge process precedes below panel.
Self-shift type PDP :
Process of combining substrates. High temperature process that melts solder glass combining substrates.
9-10 Samsung Electronics