External Unit - Panasonic SC-HC20 Operating Instructions Manual

External unit

Enjoying audio from iPod or iPhone
g Inserting or removing an iPod/iPhone
 Push to open the dock.
 Insert the suitable dock adapter (not included) for the
iPod/iPhone.
Insert the side of the iPod/iPhone dock adapter with the clips facing
towards you first and then push the opposite side until it clicks into
place.
 Connect the iPod/iPhone (not included) firmly.
Be sure to remove the iPod/iPhone from its case.
To remove, simply pull the iPod/iPhone straight out to disconnect it.
• When inserting an iPod/iPhone into the unit, be sure to use the dock
adapter either supplied with the iPod/iPhone or commercially available
from Apple Inc.
• When not using the dock, push it back until it locks.
• Reduce the volume of the main unit to minimum before connecting or
disconnecting the iPod/iPhone.
Play
Pause
Skip track
Search the current track
Display iPod/iPhone menu/
return to previous menu
Select contents from
iPod/iPhone menu
Notes on iPhone:
• All phone features can only be controled by the iPhone's touch
screen.
• The unit does not display incoming calls or the phone status.
• The ringtone of incoming call can be heard from the iPhone's speaker.
When the unit is in iPod/iPhone mode, the ringtone can also be heard
from the unit's speakers.
• The voice of caller cannot be heard on the unit's speakers. The user
can use the iPhone internal microphone though.
• Connecting or disconnecting the iPhone from the unit will not cancel
a call.
• There is no Apple Inc. specification that will guarantee the iPhone
responses above. iPhone responses may vary on new iPhone models
or iPhone new software updates.
■ Charging the iPod/iPhone
• When iPod/iPhone is being charged in standby mode,
"IPOD CHARGING" is shown on the main unit's display.
• Check iPod/iPhone to see if the battery is fully charged. If you are
not using iPod/iPhone for an extended period of time after recharging
has completed, disconnect it from the main unit as the battery will be
depleted naturally. (Once fully recharged, additional recharging will
not occur.)
8
8
PUSH-OPEN
iPod
Push!
Press [iPod q/h].
Press [iPod q/h] or [g].
Press [u/t] or [y/i].
Press and hold [u/t] or [y/i].
Press [iPod MENU] in the play mode.
(Remote control only)
Press [e,r] and then [OK].
(Remote control only)
■ Compatible iPod
Name
iPod nano 5th generation (video camera)
iPod touch 2nd generation
iPod classic
iPod nano 4th generation (video)
iPod classic
iPod touch 1st generation
iPod nano 3rd generation (video)
iPod classic
iPod nano 2nd generation (aluminum)
iPod 5th generation (video)
iPod 5th generation (video)
iPod nano 1st generation
iPod 4th generation (color display)
iPod 4th generation (color display)
iPod 4th generation
iPod 4th generation
iPod mini
■ Compatible iPhone
Name
iPhone 3GS
iPhone 3G
iPhone
• Compatibility depends on the software version of the iPod/iPhone.
Changing the main unit and remote control
mode
The remote control and main unit are factory-set to "REMOTE 1" mode.
If you find the remote control unintentionally also controls other
equipment, you can switch to operate in "REMOTE 2" mode.
To switch to "REMOTE 2" mode (by main unit only)
 Press [FM/AM/AUX] to select ''AUX''.
 Press and hold [FM/AM/AUX] and then press [2] until
"REMOTE 2" is displayed.
 Press and hold [OK] and [2] for at least 2 seconds.
To return to "REMOTE 1" mode
Repeat the steps above but replace [2] with [1].
("REMOTE 1" will be displayed.)
Memory size
8 GB, 16 GB
8 GB, 16 GB, 32 GB,
64 GB
120 GB, 160 GB (2009)
8 GB, 16 GB
160 GB (2007)
8 GB, 16 GB, 32 GB
4 GB, 8 GB
80 GB
2 GB, 4 GB, 8 GB
60 GB, 80 GB
30 GB
1 GB, 2 GB, 4 GB
40 GB, 60 GB
20 GB, 30 GB
40 GB
20 GB
4 GB, 6 GB
Memory size
16 GB, 32 GB
8 GB, 16 GB
4 GB, 8 GB, 16 GB