Table of Contents
Advertisement
Symptom
Cannot hear the
other party.
When making a call,
a beeping sound
is heard from the
earpiece and a
connection cannot be
established.
The incoming LED
flashes but the ring
tone does not play.
Cannot charge the
battery pack.
When the camera is
activated, no subject
is displayed.
•
For more detailed information, visit the following au troubleshooting sites:
- From an au cell phone: R ⇒ au one Top ⇒ auお客さまサポート (au Customer Support) ⇒ オンラインマニュアル
(Online Manual) ⇒ 故障診断Q&A (Troubleshooting FAQ)
- From a PC: http://www.kddi.com/customer/service/au/trouble/kosho/index.html
48
Possible Cause
● Is the earpiece volume too low?
● Is
(out of range indicator) displayed?
Or are you in a location where the signal
is too weak?
● Is the wireless line busy or is the phone
you are calling on another line?
● Is manner mode turned on?
● Is
(ring tone off indicator) displayed?
● Is the cell phone inserted in the desktop
holder properly?
● Are the plug and connector of the
common AC adapter 01/02 (sold
separately) inserted properly?
● Is a finger or other object covering the
camera (lens)?
Remedy
Press u during a call to increase the
earpiece volume.
Move to a location where
indicator) is no longer displayed.
End the call and try again later.
Hold down < for at least one second to
turn off manner mode.
Increase the volume of the incoming call
ring tone.
Insert the cell phone in the desktop holder
properly.
Insert the plug and connector firmly.
Check the position of the camera (lens)
and remove the obstacle.
Page
18
(out of range
10
16
18
19
8
31
Advertisement
Table of Contents
