Led Pcb And Keyboard; Arm Assembly Removal - Tandy 1400LT Service Manual

(8) Remove four Arm screws (two for each) and remove the Arm assemblies. (Figure 2-10)
(9) Pull off the Lever Covers (right and left) from the Arm assemblies.
Lever Cover (R)
Figure 2-10. Arm Assembly Removal
11-4. LED PCB and Keyboard
(1) Remove four Keyboard screws. (Figure 2-1 1)
(2) Remove the LED Bracket screw.
(3) Remove the LED connector from the Main PCB and remove the LED unit.
(4) Remove two Keyboard connectors from the Main PCB and remove the keyboard.
LED Bracket Screw (TaDDina Screw)
\
LED Connector
Figure 2-1 1. LEC PCB and Keyboard Removal
2-6