14 | Operation
4.2 Switching the appliance ON/OFF
Startup
▶ Switch the appliance ON using the ON/OFF switch.
The display shows the supply temperature.
Fig. 4
If the display shows
the appliance operates at its lowest output for 15 minutes per the
initial startup sequence.
Shutdown
▶ Switch the appliance OFF using the ON/OFF switch.
The diplay goes out.
▶ If the appliance is taken out of service for a longer period: Observe frost
protection ( Section 4.8).
4.3 Turning the space heating ON
The maximum supply temperature can be set from 95 °F (35 °C) up to approx.
194 °F (90 °C). The current supply temperature is shown on the display.
With radiant floor heating, limit the maximum permissible supply
temperature.
Greenstar
in alternation with the supply temperature,
6 720 818 061 (2015/11)