Software Upgrade; Using Tv Functions - Samsung HW-F750 User Manual

functions
POWER
POWER
TV POWER
AUTO
SOURCE POWER SPEAKER TV SOURCE
SoundShare
AUTO
REPEAT
POWER
SOURCE SPEAKER TV SOURCE
TV VOL TV CH AUDIO SYNC
TV MUTE TV INFO TV PRE-CH VT DIMMER
SOUND EFFECT REPEAT
SMART VOLUME
VOL
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND DRC
PLUS TV VOL TV CH
AH59-02545A
TV MUTE TV INFO TV PRE-CH VT DIMMER
SOUND EFFECT
VOL
S/W
MUTE
LEVEL
VOL
3D SOUND
PLUS
POWER TV POWER POWER POWER
AUTO
SOURCE POWER SPEAKER TV SOURCE
SoundShare
REPEAT
AUTO AUTO
AH59-02545A
POWER POWER SPEAKER TV SOURCE SPEAKER TV SOURCE
TV VOL TV CH AUDIO SYNC SOURCE SOURCE
TV MUTE TV INFO TV PRE-CH VT DIMMER
SOUND EFFECT SMART VOLUME
VOL
REPEAT REPEAT
S/W S/W
MUTE
LEVEL LEVEL
VOL
3D SOUND DRC
PLUS
TV VOL TV VOL TV VOL TV CH TV CH TV CH
AH59-02545A
TV PRE-CH VT DIMMER TV PRE-CH VT DIMMER
TV MUTE TV MUTE TV INFO TV PRE-CH TV INFO TV INFO
SOUND EFFECT SOUND EFFECT
VOL VOL
S/W S/W
MUTE MUTE
LEVEL LEVEL
VOL VOL
3D SOUND 3D SOUND 3
PLUS PLUS
AH59-02545A AH59-02545A

sOftWare UPgraDe

Samsung may offer upgrades for the Crystal Surround Air
Track's system firmware in the future.
If an upgrade is offered, you can upgrade the firmware by
connecting a USB drive with the firmware upgrade stored on
it to the USB port on your Air Track.
Note that if there are multiple upgrade files, you must load them
onto the USB drive singly and use them to upgrade the firmware
one at a time.
Please visit Samsung.com or contact the Samsung call center
to receive more information about downloading upgrades files.
▪
Insert a USB drive containing the firmware upgrade into the USB port on the main unit.
▪
Do not disconnect the power or remove the USB drive while upgrades are being applied. The main unit will
turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
▪
Once upgrading the product software is completed, turn off the product and then press and hold (@) button for
a while to reset the product.
▪
If the firmware fails to upgrade, we recommend formatting the USB device in FAT16 and trying again.
▪
For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
▪
Depending on the manufacturer, some USB devices may not be supported.
22
Using the Anynet+(HDMI-CEC) function
TV POWER
Anynet+ is a function that enables you to control other Samsung Devices
with your Samsung TV's remote control.
SoundShare
The Anynet+ function turns on and off each time you press Anynet+.
1. Connect the product to a Samsung TV with an HDMI cable.
AUDIO SYNC
(See page 13)
2. Set the Anynet+ function on your TV and the SAT to ON. (See the
TV instruction manual for more information.)
SMART VOLUME
▪
▪
S/W
LEVEL
Using the TV functions (with Samsung TVs only)
DRC
TV POWER TV POWER
• Press TV SOURCE on the remote control to change the TV's input
TV SOURCE
source.
SoundShare SoundShare SoundShare
• Press TV INFO on the remote control to display the TV channel
information.
• Press TV CH on the remote control to select the TV channel.
AUDIO SYNC AUDIO SYNC
• Press TV VOL on the remote control to increase or decrease the volume
level.
• Use TV PRE-CH button to move to the previous TV channel in TV mode.
SMART VOLUME SMART VOLUME
▪
S/W S/W
LEVEL LEVEL
DRC DRC
▪
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user's manual of your TV and check for the
logo (If your TV has an
Anynet+ function.)
When you press the SoundShare button, the TV's sound is
transmitted through the Air Track system via a Bluetooth
connection. The Air Track also controls the sound volume,
sound quality, etc.
The remote control can operate TVs made by SAMSUNG only.
logo, then it supports the