Sipura Technology SPA-2100 Supplemental User's Manual

Ata with pc router
Hide thumbs Also See for SPA-2100:

Advertisement

Quick Links

SPA-2100 Administrative Supplement
Sipura Technology, Inc.
SPA-2100 ATA with PC Router
User Guide Supplement
January 2005 v1
© 2003 - 2005 Sipura Technology, Inc
Proprietary (See Copyright Notice on Page 2)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPA-2100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sipura Technology SPA-2100

  • Page 1 SPA-2100 Administrative Supplement Sipura Technology, Inc. SPA-2100 ATA with PC Router User Guide Supplement January 2005 v1 © 2003 - 2005 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
  • Page 2: Disclaimer - Please Read

    Disclaimer – Please Read: This document contains implementation examples and techniques using Sipura Technology, Inc. and, in some instances, other company’s technology and products and is a recommendation only and does not constitute any legal arrangement between Sipura Technology, Inc. and the reader, either written or implied.
  • Page 3: Compliance And Safety Information

    61000-4-5:1995, EN 61000-4-6:1996, EN61000-4-8:1994, EN 61000-4-11:1994, EN 61000-3- 2:2001, EN 61000-3-3:1995 & EN 55022:1998 Class B Modifications to this product not authorized by Sipura Technology could void FCC approval, terminating end user authority to use this product. For Indoor Use Only.
  • Page 4 1. One or Two Analog Touch Tone Telephones (or Fax Machine 2. Access to Your Cable or DSL Modem and the Attached Ethernet Cable 3. Access to PC That Will Connect to the PC Port of the SPA-2100 with a web browser. C. Connect the Networked Devices with Ethernet Cables: 1.
  • Page 5: Step 3: Pc Configuration

    SPA-2100 Administrative Supplement Step 3: PC Configuration Configure the PC That Will Connect to the Internet Through the SPA-2100: A. Open the “Local Area Connection” settings menu of the PC. - Windows XP: “Start - Settings - Control Panel - Network Connections”.
  • Page 6 SPA-2100 Administrative Supplement Step 4: Network and Service Configuration Settings © 2003 - 2005 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
  • Page 7: Wan Setup

    SPA-2100 Administrative Supplement Router Configuration Parameters: WAN Setup: Internet Connection Settings: The SPA-2100 supports three types of Internet connections: DHCP, Static IP and PPPoE (PPP over Ethernet). Parameter Name Description Type Default Connection Type Select type your Internet Choice DHCP Connection.
  • Page 8 The MAC address to be cloned MACAddr Remote Management: Remote Management allows you to configure the SPA-2100 through the web interface via the WAN port. By default, this function is disabled and must be enabled by the Administrator of the SPA-2100.
  • Page 9: Lan Setup

    Static DHCP Lease Settings: Static DHCP Leases enable the SPA-2100 to always assign the same IP address to a specified device. There are a total of ten entries. Each entry has the same three properties described below:...
  • Page 10 SPA-2100. These ports and other system reserved ports CANNOT be used by Port Forwarding and/or DMZ service. For example, 5060 is reserved if line 1 of the SPA-2100 is enabled. © 2003 - 2005 Sipura Technology, Inc...
  • Page 11: Ivr Interface

    Use the * (star) key IP Address when entering a decimal point. Enable/Disable Wan Port Enter 1 to enable 7932 Web Server Enter 0 to disable © 2003 - 2005 Sipura Technology, Inc Proprietary (See Copyright Notice on Page 2)
  • Page 12 SPA-2100 Voice Service Configuration and Settings: Please see the SPA ATA User Guide for information about the voice service configuration and settings. The SPA ATA User Guide can be found on the Sipura Technology web site. http://www.sipura.com/support Support: Service providers may contact Sipura Technology and receive direct support by sending e- mail to support@sipura.com.

Table of Contents