Cleaning - Buffalo GH187 User Instruction Manual

Filter Replacement (filtered models only)
Code: GC719
When the filter needs replacing the Red LED on the controller will flash. To replace the
filter:
1. Remove drip tray
2. Twist the cartridge 90
taken when doing this as it will contain a small amount of water)
3. Insert new filter cartridge into filter head
4. Turn cartridge clockwise to lock
To reset the filter warning (flashing LED) the following procedure must take place:
1. Place fingers on the controller screen as indicated in the image below:
WARNING: Disconnect unit from electrical supply
before cleaning, descaling or replacing any parts.

Cleaning

We recommend cleaning your appliance on a regular basis. Failure to do this
may result in the appliance not operating to its full potential and could invali-
date your warranty.
Important: Do not immerse the appliance in water or any other liquids and take care
to keep water away from the mains lead and connections.
1. Clean the external surfaces of the unit regularly to maintain hygiene.
2. Empty the drip tray regularly
3. Wipe the dispensing tap daily to remove any lime-scale deposits and check that
the water outlet is clear
4. Wipe the unit down with a damp soft cloth
Do not allow excess water to run into the unit
5.
Do not use abrasive creams or scoure
6.
(1/4 turn) counter clockwise to unlock (care should be
0
!
ON
Cleaning & Maintenance
10 s