End Of Treatment; Maintenance And Storage; When It Is Difficult To Attach The Pads - Omron E4 Instruction Manual

Electronic pulse massager
Hide thumbs Also See for E4:
Table of Contents

Advertisement

Available languages

Available languages

6. End of treatment

After 15 minutes the massager stops automatically.
1
Stop program if required.
Caution! Stop treatment when you want to change
the treatment program!
Caution! Stop treatment when you want to move a
Long Life pad!
Caution! Stop treatment when you feel discomfort
with your body or skin!
Caution! Stop treatment when the massager is not
functioning properly or you feel discomfort!
2
Remove the Long Life pads and place the pads
on the Long Life pads holder.
OFF
"Click"
3
Pinch the safety plug and remove it from the
main unit.
4
Disconnect the electrode cord from the Long
Life pads.

7. Maintenance and Storage

7.1 When it is difficult to attach the pads

Wash the Pads when the adhesive surface
becomes dirty and the Pads are difficult to
attach.
- Wash the Pads after every thirty uses. Pads
can be washed approximately ten times.
- Pads are consumables. Purchase the optional
Pads when the adhesive surface is damaged.
(Refer to page 14.)
* The life of Pads may vary by the frequency of
wash, skin condition, and storage state.
1
Turn off the power, then remove the Electrode
Cord fromthe Pad.
2
Wash the Pad softly with your fingertips under
slow running cold water for several seconds.
E4 English
EN
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E4 hv-f128-e

Table of Contents