Hama 00049244 Operating Instructions Manual page 2

G Operating instruction
Content
1) Explanation of Warning Symbols and Notes
2) Package Contents
3) Safety Instructions
4) System Requirements
5) Installing the driver
a) Windows
b) Mac OS X
6) Care and Maintenance
7) Disclaimer
8) Service and Support
9) Specifications
10) Disposal Instructions
11) Declaration of Conformity
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
Before you begin the installation of your new USB 2.0
Fast Ethernet Adapter, make sure that all components are
present:
• USB 2.0 Fast Ethernet Adapter
• Driver CD-ROM
• These operating instructions
2
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Lay all cables so that they do not pose a tripping hazard.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according to
locally applicable regulations
• Do not modify the product in any way. Doing so voids
the warranty.
Warning
• Do not open the product or continue to operate it
if it is damaged, which may be indicated by smoke,
odour or loud noises. Contact your dealer or our
service department immediately (see Service and
Support.)
4. System Requirements
The Hama USB Fast Ethernet Adapter supports the
following operating systems:
• Windows 10 / 8.1 / 8 / 7
• MAC OS X 10.8 or higher
The computer/notebook must have a free USB 2.0/3.0
port. Power is supplied via the USB port.