Toyota 2015 Sienna Quick Reference Manual page 18

SAFETY AND EMERGENCY FEATURES
Seat belts
If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner's Manual.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the ignition switch to "ON" and press and hold the "
blinks three times. Let the vehicle sit for a few minutes to allow initialization to
complete.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.
Take up slack
Too high
Keep as low on
hips as possible
System reset initialization
1. Push and hold " SET" button
until the indicator blinks three
times.
2. Wait a few minutes to allow
initialization to complete.
SET" button until indicator
32
Spare tire & tools
All-Wheel Drive models are equipped with run-flat tires. Refer to the Owner's
Manual for more details.
Tool and spare tire location
Tire bag
Jack
Wheel nut wrench
Socket adapter
Tire strap
Jack handle
Spare tire
Removing the spare tire
Two-wheel drive models
Spare tire clamp bolt
Refer to the Owner's Manual for jack positioning and tire changing procedures.
Turn
Socket adapter
33