Do not illuminate surfaces within 3 meters (10 feet) of the fixture. Provide a minimum clearance of 0.1 meters around fans and air vents. Never place filters or other materials over the lens. Tango 700 user’s manual Entar Professional Limited...
Page 3
INTRODUCTION MAIN FEATURES 540°pan and 270° tilt DMX channels: 16 Lamp: Philips MSR 700 SA (optional) Power consumption: 800W Prism: rotating three faces prism Color: two color wheels Rotating gobos: 6 indexable, changeable Static gobos: 9 Focus: Motorized Stepped zoom: 15°, 18°, 22°...
Page 4
Always use an approved safety cable. CONNECTING THE SERIAL DATA LINK The Tango 700 has locking 3-pin data input and output sockets that are wired for use with DMX devices with pin 1 to shield, pin 2 to cold(-) and pin 3 to hot(+).
Press [up] or [down] key to reset the fixture. OPERATING MODES The Tango 700 can run in 3 modes: DMX, sound activation and auto. The fixtures can run in master/slave mode with sound activation. To activate sound trigger, press [mode] to enter (RUN), then press [up] or [down] key to select (PRG0).