Keep flammable materials well away from the fixture. Do not illuminate surfaces within 3 meters (10 feet) of the fixture. Provide a minimum clearance of 0.1 meters around fans and air vents. Never place filters or other materials over the lens. Tango Wash 575 User’s Manual ®...
Page 3
Color wheel: 4 dichroic filters + open, 3200K and 5600K correction filters Motorized liner zoom 7° - 28° Beam shaper and frost filter Dimmer/shutter: Full range dimming and 1~10 f.p.s. strobe Speed: pan and tilt speed adjustment Tango Wash 575 ® User’s Manual...
Page 4
Always use an approved safety cable. CONNECTING THE SERIAL DATA LINK The Tango Wash 575 has locking 3-pin data input and output sockets that are wired for use with DMX devices with pin 1 to shield, pin 2 to cold(-) and pin 3 to hot(+).
Press [up] or [down] key to reset the fixture. OPERATING MODES The Tango Wash 575 can run in 3 modes: DMX, sound activation and auto. The fixtures can run in master/slave mode with sound activation. To activate sound trigger, press [mode] to enter (RUN), then press [up] or [down] key to select (PRG0).