Advertisement
MENU NAVIGATION
The DMX address is displayed after the fixture resets. To enter the menu, press [mode]. Use the [up] and
[down] keys to select an option.
SETTING THE DMX MODE
1.
Apply power to the Tango 700. Press [mode] to enter the Addr mode.
2.
Select a DMX starting address by using the [up] and [down] keys.
3.
Store the DMX starting address by pressing the [mode].
MOVEMENT
The Tango 700 provides 2 menus with options for optimizing movement to suit different applications.
(PAN->YES) allows you to reverse pan movement.
(Tilt->YES) allows you to reverse tilt movement.
RESET
The Tango 700 can be reset without switching off the power supply (RSET).
1.
Press [mode] to enter the (rSEt) mode.
2.
Press [up] or [down] key to reset the fixture.
OPERATING MODES
The Tango 700 can run in 3 modes: DMX, sound activation and auto. The fixtures can run in
master/slave mode with sound activation.
To activate sound trigger, press [mode] to enter (RUN), then press [up] or [down] key to select (PRG0).
To run the built-in sequences, press [mode] to enter (RUN), then press [up] or [down] key to select
(PRG1).
To set a fixture run as a slave unit, press [mode] to enter (RUN), then press [up] or [down] key to select
(FOLL).
Tango 700 user's manual
CONTROL PANEL
Entar Professional Limited
5
Advertisement
