D-Link ShareCenter DNS-320L User Manual page 352

Section 4 - Configuration
COMPONENT
Motion Detection
Copy
Quota Settings
Automatic Overwrite
Quota
Keep the File within
Estimate Required Space
Event Record: Pre-record
Event Record: Post Record
Record Mode
Record Mode
Record Mode
DNS-320L
D-Link ShareCenter™
DESCRIPTION
When using the Record by Schedule mode together with the Motion Detection function, you
must first click the Go.to.Web.link and log in to the camera's web interface and enable the motion
detection function on that camera. Please refer to the manual of your camera for more information
on enabling motion detection.
Copy the camera recording setup to other similar cameras
Configurable per camera. Indicates the maximum amount of disk space will be used for recordings.
Click this checkbox if you wish to overwrite the earliest recorded video with the latest video if reaches
the quota limitation or disk space is full.
Click this checkbox to set the amount of storage you want to allocate to each camera. Next to it is
displayed the remaining free disk space
This indicates how long you want to keep the recorded camera video files before it is overwritten.
Click this button to find out how much disk space is required for video storage with the current
settings.
If required, select how long video should be recorded for prior to an event alarm being triggered
(1-180 seconds).
If required, select how long video should be recorded for following an event alarm being triggered
(1-180 seconds).
No Record - no recording is made
Record by Schedule - Drag and drop on the weekly map below
• Always.Record means that the camera will always record for the specified period.
• Motion.Detection.Record will wait for motion on the camera to be detected before it begins
recording
• Event.Record will wait for event on the camera to be triggered before it begins recording
Manual Record - requires you to manually click a record button to begin recording.
User Manual
346